Is my vapor genie broken??

Discussion in 'Vaporizers' started by tanman636, Aug 3, 2008.

  1. tanman636

    tanman636 New Member

    The screen thing where i put my weed is coming out a little bit!! what do i do??? :( does it really matter that much? what is the part exactly called?? is there free replacements on the website? thanks.
  2. BudMarLeY

    BudMarLeY New Member

    what screen thingy, u talken about the ceramic top? theres weed coming through it?
    its not hard to break that ceramic top. never slam it against anything. and yea u can get replacement but there is soposed to be no weed coming through the top screen.
  3. tanman636

    tanman636 New Member

    naah, its just coming out of place.
  4. BudMarLeY

    BudMarLeY New Member

    it is soposed to be free moving but if the heat can go into the sides than u have a fulty product.
    the whole purpose the the ceramic screen is to lower the temp of the heat off the flame. but if the flame travels down the side of it, than its not getting cooled down.
  5. tanman636

    tanman636 New Member

  6. Mike

    Mike New Member

    Do you mean the screen or the ceramic thingy? because either way I guess you should write the company...I think they replace both but it might just be the screens.
  7. Vronin

    Vronin New Member

    It sounds like you are talking about the screen... you should be able to put it right back in place with your finger. I've taken the screen out to clean the VG and put it right back in with no problems. But if you need to you can get free replacement screens from the website.

    Since you described it as where you put your weed, I sure hope you're not talking about the ceramic filter top!
  8. tanman636

    tanman636 New Member

    i just meant the screen thing where u put the weed on.
  9. Vronin

    Vronin New Member

    You can call the "screen thing" a "screen" for short. ;)
  10. tanman636

    tanman636 New Member

    ok so its all good, right? its supposed to come out and everything?

Share This Page